Richtek Blog

There are few things more frustrating than having your power go out in the middle of the night. Being stuck in the hot temperatures of Perth with nothing to power your air conditioner, or finding yourself without power on the weekend when the typical electrician isn’t working, can be the cause of a whole world of headache.

This is where emergency electricians in Perth come in! There’s good news and bad news, though. The good news? There are a lot of options to choose from when it comes to finding an emergency electrician in your area. The bad news? It can be difficult to find the right one for you that you can faithfully rely on.

That’s why we’re here to help make that decision easier for you. Here’s everything you need to look at when trying to track down a reliable emergency electrician in Perth that is going to get the job done well, in a timely manner, and get it done right the first time around!

Find Companies Near You

The first step is to find companies that meet the most important requirement – that they are near you. Find local companies in Perth that offer emergency electrician services to begin your search. Once you have compiled this list of contenders, your next step is to start narrowing down your options to find a company that will work best for you.

You can find companies near you with a simple web search. It will likely turn up a significant number of local companies in Perth willing and ready to provide you with emergency electrician services. The trick is being able to tell the gems from the duds. That’s where these next steps come in!

Research Your Options

Once you have a list of local companies compiled, it’s time to start the research phase. For most of the questions you have about their services, you should be able to find on their website. Take a look at their website, read through it and what they offer with their service. Find what their hours and availability are, especially during those emergency hours – like weekends and after dark. Look at what they charge for their service and ask yourself if it fits into your budget.

Reading through their website, you can get a feel for if the company seems like a reputable service that you would like to have in your home and trust with your emergency electrician needs. If the company is riddled with typos, then you probably are going to want to pass on them as they’re probably not a very reputable company. Does their About Us page resonate with you? Are they dedicated to customer satisfaction and going the extra mile to make sure their clients are well taken care of? If so, and they meet your other requirements, they may be a good option for you.

Compile a list of all the companies that appear to have passed the research phase of your search for the right emergency electrician in Perth. These are all the companies that meet your requirements based on their website. Next, you have to find out if they’re actually the real deal.

Check Out Their Reviews

The next step is to check out the reviews of the companies that made the cut to determine whether or not they’re really up to the task. To put them to the real test, you need to find out what other people have thought in the past after using their service.

Ask any friends you may know who have used their service what their experience was like. You can also search for reviews of the company online to get an idea of what previous people have thought about the service they provided.

The Verdict

We understand that you have a lot of companies to choose from when it comes to an emergency electrician in Perth. That’s why we strive to make that decision easy at Richtek by providing quality electrical solutions every step of the way!

We hope this guide has helped lead you towards the right emergency electricity service provider in Perth for you!

by oliverwood

In an age where the range of laptops, tablets, smartphones and other devices hang around the home and office like furniture, it is hard to imagine a time without them. But they are here to stay and all need regular charging with USB chargers. But bulky USB adaptors, such as the big box at the end of your iPhone charger, not only hogs outlet space in the home, office or public space, but also takes up unnecessary space in your pocket, bag or indeed suitcase when on your travels. With USB power points becoming more of a necessity than a luxury, you may have started to ponder if it is time to upgrade your power points and start thinking about hiring a professional domestic electrician to make life easier.

Fortunately, USB power points are now regularly being installed by a domestic electrician in Perth like Richtek Electrical Solutions in new homes and flats and are increasingly becoming a popular feature requested by homeowners and investors. And installation is pretty straightforward. It comprises of a simple swap over, of an existing power point with a wall mounted USB Power point.

Most homes nowadays have a number of smart phones and tablets at the very least. Having said that, chances are with larger families, there is likely to be a whole host of other items that require USB charging including digital cameras, fitness trackers, video cameras, camcorders, mp3 players, Go-Pro, GPS, game consoles, and bike computers. The devices listed above are enough to cause mayhem in the home or office with tangled cables and traditional power points being overloaded. Not only are these unsightly, but they also represent some serious health and safety hazards around the home or office say electrician in Perth experts Richtek Electrical Solutions.

It is surprising that despite the exhaustive list above of devices needing USB power points changing points, the majority of homes still do not have USB sockets built into power points. But builders and domestic electricians in Perth are becoming savvy and wall mounted USB power points are being made widely available and are fast becoming standard installs both in commercial and residential homes.

The benefits

There are a plethora of benefits to installing USB power points both in your home and office. Richtek Electrical Solutions have listed some of the benefits below.

Greater current supply

Nearly all smartphones, tablets, and other mobile devices can be charged using the charger for the device or plugging a cable into your computer or laptop’s USB port. But the standard desktop computer USB port is often limited to a maximum current of 500 amps. In contrast, wall chargers deliver a much higher voltage, which translates into being able to charge your device in less time. Therefore, by utilising a USB power points, you can enjoy the convenience of not having to charge your device constantly and hence saving on recharge time.

Far more convenient

We all have experienced frustrating moments when our device is operating on low battery but there is no charger to be found. It is often the case that we use our devices in multiple rooms so the charger could be in a number of different places. And when we need it the most, it is difficult to locate. But if you have power points with USB chargers dotted around your home or office, you no longer need to run around hunting your charger. You can simply plug in your device and top up on the battery. On top of that, since most USB power points have multiple ports, several devices can be charged simultaneously. This will help solve the problem of clutter in the shape of multiple bulky charger units.

Much better safety

Electrician specialist Richtek Electrical Solutions, who undertake any electric-related task in Perth and the surrounding areas, have witnessed cases where power points become a hazard due to the clutter of adapters and chargers. Plugging in numerous charger units can overload the power points, which is dangerous and could possibly result in a significant fire hazard. Thankfully, because USB power points are a lot more efficient at charging various devices, there is less need for using multiple power adaptors. As a result, the risk of overloading is minimised.

Increased durability

You may not be aware, but chargers for smartphones, tablets, video cameras, game consoles, and other mobile devices are susceptible to damage. Add to that, the need to buy a brand new charger when upgrading your device, it is highly unlikely your existing charger will be compatible with the new one. So, by getting an electrician in Perth to replace your outlets to power points with USB chargers, you will no longer need to rely on twitchy chargers because you can plug them in directly.

Planning for an electrical system in the home

Whеn planning the electrical system in your own home, it will pay to take into consideration installing dedicated USB power points аrоund thе house which can act аѕ charging stations. This will save you from constantly moving уоur devices аnd chargers around. Some of the key places tо install USB power points are, thе kitchen, living room, bedroom, hallway, landing and a home office. By having dedicated charging zones, areas will be less unsightly and you will know exactly where all your devices are. Nоt оnlу аrе dedicated charging areas lеѕѕ unsightly, but thеу аlѕо mаkе іt easier fоr уоu tо kеер track оf еxасtlу whеrе аll уоur devices are.

But installing a new USB power points or replacing an existing power point is not a task to take on board yourself. You need a qualified electrician in Perth like Richtek Electrical Solutions to do this for you. That’s because by law an electrical license іѕ required bеfоrе аnу electrical wiring work саn bе undertaken іn Perth. Richtek Electrcial Solutions іѕ licensed, insured аnd bonded tо carry оut thіѕ type оf electrical services іn Perth and surrounding areas.

If you need an electrical contractor for domestic or commercial purposes that guarantees quality workmanship, excellent communication and an efficient service, the professionals at Richtek Electrical Solutions are waiting to take your call. They can be contacted on (08) 9375 3926.

by oliverwood

It’s important to regularly check and change your smoke alarm battery. But with so many models on the market, it can be difficult to work out how to change it. Luckily, most smoke detectors take the same 9V battery, and smoke alarms have been designed to make it safe to change the battery without danger of electrocution. If you’ve lost your instruction manual, it’s usually still fairly easy to replace the battery, and here are a few things to remember.

Replace the battery annually

Smoke alarms should be tested once a month by pushing the ‘test’ button, and if the battery has run out, obviously it’s time to replace. However, you should also change the 9V battery once a year, whether it’s run out or not. If you have an alarm that has been hardwired by an electrician in Perth, there is usually a backup battery. It’s important that this works, as it can detect a fire even if your power is cut-off.

Clean your smoke detector

Not many people realise you should clean your smoke detector. With the cover on, use a vacuum cleaner to suck dust between the holes, and wipe down the exterior. This will:

• Remove dust from the sensor, making it more efficient
• Prevent false alarms
• Lengthen the life of your smoke detector
• Remove build ups of pet hair, dander, and pollen

Look at the expiry date

Changing your smoke alarm battery is a good excuse to check the expiry date. By law, smoke detectors should be replaced every ten years because they become less sensitive over time. Older smoke detectors can also be less reliable. If you look at the back of the head, you should see an expiry date, and can decide whether it’s time to replace.

If it’s time to replace your smoke alarm, it’s worth looking at getting a hardwired model installed. Contact an electrician if you’re thinking of getting one of these systems. One of the main advantages of these systems is that they’re connected, so if one goes off, they all do. This ensures if there’s a fire, everyone in the house hears the alarm.

Use a reliable battery

Your smoke alarm battery is not something you should be scrimping on. Make sure you used a recognised brand of battery to ensure reliability. Usually, it’s easy to change a battery, just twist or pull the cover off, pop the old one out, and put in the new 9V battery, ensuring the + and – symbols are in the right position.

When the cover is back on, press the button to test the alarm. If you’re using a hardwired system, there’s usually a green light to show that the system is switched back on, but you might need to check your manual if your model is a little different.

For help with the installation and maintenance of smoke alarm systems, call Richtek Electrical & Air Solutions on (08) 9375 3926. With emergency call-outs available, they can help you keep your home safe.

by oliverwood